]> Orange

mohamed.boucadair@orange.com

Juniper

rroberts@juniper.net

Nokia

samier.barguil_giraldo@nokia.com

Telefonica

oscar.gonzalezdedios@telefonica.com

Operations and Management OPSAWG Slice Service L3VPN L2VPN The document specifies a module that updates existing service and network VPN modules with the required information to bind specific services to ACs that are created using the Attachment Circuit (AC) service model. Discussion Venues Discussion of this document takes place on the Operations and Management Area Working Group Working Group mailing list (opsawg@ietf.org), which is archived at . Source for this draft and an issue tracker can be found at .

Introduction The document specifies a YANG module that updates existing service and network VPN modules with the required information to bind specific services to Attachment Circuits (ACs) that are created using the AC service model , specifically the following modules are augmented:

• The Layer 2 Service Model (L2SM)
• The Layer 3 Service Model (L3SM)
• The Layer 2 Network Model (L2NM)
• The Layer 3 Network Model (L3NM)

Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here. The meanings of the symbols in the YANG tree diagrams are defined in . This document uses terms defined in . LxSM refers to both the L2SM and the L3SM. LxNM refers to both the L2NM and the L3NM.

Sample Uses of the Data Models

ACs Terminated by One or Multiple Customer Edges (CEs) depicts two target topology flavors that involve ACs. These topologies have the following characteristics:

• A Customer Edges (CEs) can be either a physical device or a logical entity. Such logical entity is typically a software component (e.g., a virtual service function that is hosted within the provider's network or a third-party infrastructure). A CE is seen by the network as a peer SAP.
• An AC service request may include one or multiple ACs, which may be associated to a single CE or multiple CEs.
• CEs may be either dedicated to one single connectivity service or host multiple connectivity services (e.g., CEs with roles of service functions ).
• A network provider may bind a single AC to one or multiple peer SAPs (e.g., CE#1 and CE#2 are tagged as peer SAPs for the same AC). For example, and as discussed in , multiple CEs can be attached to a PE over the same attachment circuit. This scenario is typically implemented when the Layer 2 infrastructure between the CE and the network is a multipoint service.
• A single CE may terminate multiple ACs, which can be associated with the same bearer or distinct bearers.
• Customers may request protection schemes in which the ACs associated with their endpoints are terminated by the same PE (e.g., CE#3), distinct PEs (e.g., CE#34), etc. The network provider uses this request to decide where to terminate the AC in the network provider network and also whether to enable specific capabilities (e.g., Virtual Router Redundancy Protocol (VRRP)).

Examples of ACs

Separate AC Provisioning vs. Actual Service Provisioning The procedure to provision a service in a service provider network may depend on the practices adopted by a service provider. This includes the flow put in place for the provisioning of advanced network services and how they are bound to an attachment circuit. For example, a single attachment circuit may be used to host multiple connectivity services. In order to avoid service interference and redundant information in various locations, a service provider may expose an interface to manage ACs network-wide. Customers can then request a bearer or an attachment circuit to be put in place, and then refer to that bearer or AC when requesting services that are bound to the bearer or AC. shows the positioning of the AC service model is the overall service delivery process.

An Example of AC Model Usage

Module Tree Structure ACs created using the "ietf-ac-svc" module can be referenced in other modules (e.g., L2SM, L3SM, L2NM, and L3NM). Also, ACs managed using "ietf-ac-ntw" can be referenced in other network modules (e.g., L2NM and L3NM). Some augmentations are required to that aim as shown in .

AC Glue Tree Structure

The AC Glue ("ietf-ac-glue") YANG Module WG List: Editor: Mohamed Boucadair Author: Richard Roberts Author: Samier Barguil Author: Oscar Gonzalez de Dios "; description "This YANG module defines a YANG model for augmenting the LxSM and the LxNM with attachment circuit references. Copyright (c) 2023 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices."; revision 2023-11-13 { description "Initial revision."; reference "RFC XXXX: A YANG Data Model for Augmenting VPN Service and Network Models with Attachment Circuits"; } grouping ac-svc-glue { description "A set of service-specific AC-related data."; leaf-list ac-svc-ref { type ac-svc:attachment-circuit-reference; description "A reference to the AC as exposed at the service that was provisionned using the ACaaS module."; } } grouping ac-glue { description "A set of AC-related data."; leaf-list ac-svc-ref { type ac-svc:attachment-circuit-reference; description "A reference to the AC as exposed at the service that was provisionned using the ACaaS module."; } leaf-list ac-ntw-ref { type ac-ntw:attachment-circuit-reference; description "A reference to the AC that was provisionned using the AC network module."; } } augment "/l2vpn-svc:l2vpn-svc" + "/l2vpn-svc:sites/l2vpn-svc:site" + "/l2vpn-svc:site-network-accesses" + "/l2vpn-svc:site-network-access" { description "Augments VPN network access with AC provisioning details."; uses ac-svc-glue; } augment "/l3vpn-svc:l3vpn-svc" + "/l3vpn-svc:sites/l3vpn-svc:site" + "/l3vpn-svc:site-network-accesses" + "/l3vpn-svc:site-network-access" { description "Augments VPN network access with AC provisioning details."; uses ac-svc-glue; } augment "/l2nm:l2vpn-ntw/l2nm:vpn-services/l2nm:vpn-service" + "/l2nm:vpn-nodes/l2nm:vpn-node" + "/l2nm:vpn-network-accesses/l2nm:vpn-network-access" { description "Augments VPN network access with AC provisioning details."; uses ac-glue; } augment "/l3nm:l3vpn-ntw/l3nm:vpn-services/l3nm:vpn-service" + "/l3nm:vpn-nodes/l3nm:vpn-node" + "/l3nm:vpn-network-accesses/l3nm:vpn-network-access" { description "Augments VPN network access with AC provisioning details."; uses ac-glue; } } ]]>

Security Considerations The YANG module specified in this document defines schema for data that is designed to be accessed via network management protocols such as NETCONF or RESTCONF . The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) . The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS . The Network Configuration Access Control Model (NACM) provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) and delete operations to these data nodes without proper protection or authentication can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/ vulnerability in the "ietf-ac-glue" module:

• TBC
• TBC

Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability in the "ietf-ac-glue" module:

• TBC
• TBC

IANA Considerations IANA is requested to register the following URI in the "ns" subregistry within the "IETF XML Registry" : IANA is requested to register the following YANG module in the "YANG Module Names" registry within the "YANG Parameters" registry group.

References Normative References Orange Juniper Telefonica Nokia Huawei Technologies This document specifies a YANG service data model for Attachment Circuits (ACs). This model can be used for the provisioning of ACs before or during service provisioning (e.g., Network Slice Service). The document also specifies a service model for managing bearers over which ACs are established. Also, the document specifies a set of reusable groupings. Whether other service models reuse structures defined in the AC models or simply include an AC reference is a design choice of these service models. Utilizing the AC service model to manage ACs over which a service is delivered has the advantage of decoupling service management from upgrading AC components to incorporate recent AC technologies or features. This document defines a YANG data model that can be used to configure a Layer 2 provider-provisioned VPN service. It is up to a management system to take this as an input and generate specific configuration models to configure the different network elements to deliver the service. How this configuration of network elements is done is out of scope for this document. The YANG data model defined in this document includes support for point-to-point Virtual Private Wire Services (VPWSs) and multipoint Virtual Private LAN Services (VPLSs) that use Pseudowires signaled using the Label Distribution Protocol (LDP) and the Border Gateway Protocol (BGP) as described in RFCs 4761 and 6624. The YANG data model defined in this document conforms to the Network Management Datastore Architecture defined in RFC 8342. This document defines a YANG data model that can be used for communication between customers and network operators and to deliver a Layer 3 provider-provisioned VPN service. This document is limited to BGP PE-based VPNs as described in RFCs 4026, 4110, and 4364. This model is intended to be instantiated at the management system to deliver the overall service. It is not a configuration model to be used directly on network elements. This model provides an abstracted view of the Layer 3 IP VPN service configuration components. It will be up to the management system to take this model as input and use specific configuration models to configure the different network elements to deliver the service. How the configuration of network elements is done is out of scope for this document. This document obsoletes RFC 8049; it replaces the unimplementable module in that RFC with a new module with the same name that is not backward compatible. The changes are a series of small fixes to the YANG module and some clarifications to the text. This document defines an L2VPN Network Model (L2NM) that can be used to manage the provisioning of Layer 2 Virtual Private Network (L2VPN) services within a network (e.g., a service provider network). The L2NM complements the L2VPN Service Model (L2SM) by providing a network-centric view of the service that is internal to a service provider. The L2NM is particularly meant to be used by a network controller to derive the configuration information that will be sent to relevant network devices. Also, this document defines a YANG module to manage Ethernet segments and the initial versions of two IANA-maintained modules that include a set of identities of BGP Layer 2 encapsulation types and pseudowire types. As a complement to the Layer 3 Virtual Private Network Service Model (L3SM), which is used for communication between customers and service providers, this document defines an L3VPN Network Model (L3NM) that can be used for the provisioning of Layer 3 Virtual Private Network (L3VPN) services within a service provider network. The model provides a network-centric view of L3VPN services. The L3NM is meant to be used by a network controller to derive the configuration information that will be sent to relevant network devices. The model can also facilitate communication between a service orchestrator and a network controller/orchestrator. In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. This document describes a method by which a Service Provider may use an IP backbone to provide IP Virtual Private Networks (VPNs) for its customers. This method uses a "peer model", in which the customers' edge routers (CE routers) send their routes to the Service Provider's edge routers (PE routers); there is no "overlay" visible to the customer's routing algorithm, and CE routers at different sites do not peer with each other. Data packets are tunneled through the backbone, so that the core routers do not need to know the VPN routes. [STANDARDS-TRACK] Orange Juniper Telefonica Nokia Huawei Technologies This document specifies a network model for attachment circuits. The model can be used for the provisioning of attachment circuits prior or during service provisioning (e.g., Network Slice Service). A companion service model is specified in [I-D.boro-opsawg-teas-attachment-circuit]. The module augments the Service Attachment Point (SAP) model with the detailed information for the provisioning of attachment circuits in Provider Edges (PEs). The Network Configuration Protocol (NETCONF) defined in this document provides mechanisms to install, manipulate, and delete the configuration of network devices. It uses an Extensible Markup Language (XML)-based data encoding for the configuration data as well as the protocol messages. The NETCONF protocol operations are realized as remote procedure calls (RPCs). This document obsoletes RFC 4741. [STANDARDS-TRACK] This document describes an HTTP-based protocol that provides a programmatic interface for accessing data defined in YANG, using the datastore concepts defined in the Network Configuration Protocol (NETCONF). This document describes a method for invoking and running the Network Configuration Protocol (NETCONF) within a Secure Shell (SSH) session as an SSH subsystem. This document obsoletes RFC 4742. [STANDARDS-TRACK] This document specifies version 1.3 of the Transport Layer Security (TLS) protocol. TLS allows client/server applications to communicate over the Internet in a way that is designed to prevent eavesdropping, tampering, and message forgery. This document updates RFCs 5705 and 6066, and obsoletes RFCs 5077, 5246, and 6961. This document also specifies new requirements for TLS 1.2 implementations. The standardization of network configuration interfaces for use with the Network Configuration Protocol (NETCONF) or the RESTCONF protocol requires a structured and secure operating environment that promotes human usability and multi-vendor interoperability. There is a need for standard mechanisms to restrict NETCONF or RESTCONF protocol access for particular users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. This document defines such an access control model. This document obsoletes RFC 6536. This document describes an IANA maintained registry for IETF standards which use Extensible Markup Language (XML) related items such as Namespaces, Document Type Declarations (DTDs), Schemas, and Resource Description Framework (RDF) Schemas. YANG is a data modeling language used to model configuration and state data manipulated by the Network Configuration Protocol (NETCONF), NETCONF remote procedure calls, and NETCONF notifications. [STANDARDS-TRACK] Informative References This document captures the current syntax used in YANG module tree diagrams. The purpose of this document is to provide a single location for this definition. This syntax may be updated from time to time based on the evolution of the YANG language. This document describes an architecture for the specification, creation, and ongoing maintenance of Service Function Chains (SFCs) in a network. It includes architectural concepts, principles, and components used in the construction of composite services through deployment of SFCs, with a focus on those to be standardized in the IETF. This document does not propose solutions, protocols, or extensions to existing protocols.

Examples Add some examples.

Acknowledgments Thanks to TBC for the comments.